[asterisk-config-auf.git] / etc-asterisk / rtp.conf

;
; RTP Configuration
;
[general]
;
; RTP start and RTP end configure start and end addresses
;
; Defaults are rtpstart=5000 and rtpend=31000
;
; juste après /proc/sys/net/ipv4/ip_local_port_range
rtpstart=61001
rtpend=62000

; Whether to enable or disable UDP checksums on RTP traffic
;
;rtpchecksums=no
;
; The amount of time a DTMF digit with no 'end' marker should be
; allowed to continue (in 'samples', 1/8000 of a second)
;
;dtmftimeout=3000
; rtcpinterval = 5000 	; Milliseconds between rtcp reports 
			;(min 500, max 60000, default 5000)
Commit	Line	Data
b2e905a6 TN	1	;
	2	; RTP Configuration
	3	;
	4	[general]
	5	;
	6	; RTP start and RTP end configure start and end addresses
	7	;
	8	; Defaults are rtpstart=5000 and rtpend=31000
	9	;
	10	; juste après /proc/sys/net/ipv4/ip_local_port_range
	11	rtpstart=61001
	12	rtpend=62000
	13
	14	; Whether to enable or disable UDP checksums on RTP traffic
	15	;
	16	;rtpchecksums=no
	17	;
	18	; The amount of time a DTMF digit with no 'end' marker should be
	19	; allowed to continue (in 'samples', 1/8000 of a second)
	20	;
	21	;dtmftimeout=3000
	22	; rtcpinterval = 5000 ; Milliseconds between rtcp reports
	23	;(min 500, max 60000, default 5000)