preparation adaptations SIP (NAT et domaines)

[asterisk-config-auf.git] / etc-asterisk / dundi.conf

;
; DUNDi configuration file
; 
; For more information about DUNDi, see http://www.dundi.com
;
;
[general]
;
; The "general" section contains general parameters relating
; to the operation of the dundi client and server.
;
; The first part should be your complete contact information
; should someone else in your peer group need to contact you.
;
;department=Your Department
;organization=AUF
;locality=Your City
;stateprov=ST
;country=US
;email=voip@auf.org
;phone=+12565551212
;
;
; Specify bind address and port number.  Default is
; 4520
;
;bindaddr=0.0.0.0
;port=4520
;
; Our entity identifier (Should generally be the MAC address of the
; machine it's running on.  Defaults to the first eth address, but you
; can override it here, as long as you set it to the MAC of *something*
; you own!)
;
;entityid=00:07:E9:3B:76:60
;
; Peers shall cache our query responses for the specified time,
; given in seconds. Default is 3600.
;
;cachetime=3600
;
; This defines the max depth in which to search the DUNDi system.
; Note that the maximum time that we will wait for a response is
; (2000 + 200 * ttl) ms.
;
ttl=32
;
; If we don't get ACK to our DPDISCOVER within 2000ms, and autokill is set
; to yes, then we cancel the whole thing (that's enough time for one 
; retransmission only).  This is used to keep things from stalling for a long
; time for a host that is not available, but would be ill advised for bad 
; connections.  In addition to 'yes' or 'no' you can also specify a number
; of milliseconds.  See 'qualify' for individual peers to turn on for just
; a specific peer.
;
autokill=yes
;
; pbx_dundi creates a rotating key called "secret", under the family
; 'secretpath'.  The default family is dundi (resulting in 
; the key being held at dundi/secret).
;
;secretpath=dundi
;
; The 'storehistory' option (also changeable at runtime with
; 'dundi store history' and 'dundi no store history') will
; cause the DUNDi engine to keep track of the last several
; queries and the amount of time each query took to execute
; for the purpose of tracking slow nodes.  This option is
; off by default due to performance impacts.
;
;storehistory=yes

[mappings]
;
; The "mappings" section maps DUNDi contexts
; to contexts on the local asterisk system.  Remember
; that numbers that are made available under the e164 
; DUNDi context are regulated by the DUNDi General Peering 
; Agreement (GPA) if you are a member of the DUNDi E.164
; Peering System.
;
; dundi_context => local_context,weight,tech,dest[,options]]
;
; 'dundi_context' is the name of the context being requested
; within the DUNDi request
;
; 'local_context' is the name of the context on the local system
; in which numbers can be looked up for which responses shall be given.
;
; 'weight' is the weight to use for the responses provided from this
; mapping.  The number must be >= 0 and < 60000.  Since it is totally
; valid to receive multiple responses to a query, responses received
; with a lower weight are tried first.  Note that the weight has a
; special meaning in the e164 context - see the GPA for more details.
;
; 'tech' is the technology to use (IAX, SIP, H323)
;
; 'dest' is the destination to supply for reaching that number.  The
; following variables can be used in the destination string and will
; be automatically substituted:
; ${NUMBER}: The number being requested
; ${IPADDR}: The IP address to connect to
; ${SECRET}: The current rotating secret key to be used
;
; Further options may include:
;
; nounsolicited:  No unsolicited calls of any type permitted via this 
;                 route
; nocomunsolicit: No commercial unsolicited calls permitted via 
;                 this route
; residential:    This number is known to be a residence
; commercial:     This number is known to be a business
; mobile:         This number is known to be a mobile phone
; nocomunsolicit: No commercial unsolicited calls permitted via 
;                 this route
; nopartial:      Do not search for partial matches
;
; There *must* exist an entry in mappings for DUNDi to respond
; to any request, although it may be empty.
;
;e164 => dundi-e164-canonical,0,IAX2,dundi:${SECRET}@${IPADDR}/${NUMBER},nounsolicited,nocomunsolicit,nopartial
;e164 => dundi-e164-customers,100,IAX2,dundi:${SECRET}@${IPADDR}/${NUMBER},nounsolicited,nocomunsolicit,nopartial
;e164 => dundi-e164-via-pstn,400,IAX2,dundi:${SECRET}@${IPADDR}/${NUMBER},nounsolicited,nocomunsolicit,nopartial

;digexten => default,0,IAX2,guest@lappy/${NUMBER}
;asdf =>


;
;
; The remaining sections represent the peers
; that we fundamentally trust.  The section name
; represents the name and optionally at a specific
; DUNDi context if you want the trust to be established
; for only a specific DUNDi context.
;
; inkey - What key they will be authenticating to us with
;
; outkey - What key we use to authenticate to them
;
; host - What their host is
;
; order - What search order to use.  May be 'primary', 'secondary', 
;         'tertiary' or 'quartiary'.  In large systems, it is beneficial
;         to only query one up-stream host in order to maximize caching
;         value.  Adding one with primary and one with secondary gives you
;         redundancy without sacrificing performance.
;
; include - Includes this peer when searching a particular context
;           for lookup (set "all" to perform all lookups with that
;           host.  This is also the context in which peers are permitted
;           to precache.
;
; noinclude - Disincludes this peer when searching a particular context
;             for lookup (set "all" to perform no lookups with that
;             host.
;
; permit - Permits this peer to search a given DUNDi context on
;          the local system.  Set "all" to permit this host to
;          lookup all contexts.  This is also a context for which
;          we will create/forward PRECACHE commands.
;
; deny -   Denies this peer to search a given DUNDi context on
;          the local system.  Set "all" to deny this host to
;          lookup all contexts.
;
; model - inbound, outbound, or symmetric for whether we receive 
;         requests only, transmit requests only, or do both.
;
; precache - Utilize/Permit precaching with this peer (to pre
;            cache means to provide an answer when no request
;            was made and is used so that machines with few
;            routes can push those routes up a to a higher level).
;            outgoing means we send precache routes to this peer,
;            incoming means we permit this peer to send us
;            precache routes.  symmetric means we do both.
;
; Note: You cannot mix symmetric/outbound model with symmetric/inbound
; precache, nor can you mix symmetric/inbound model with symmetric/outbound
; precache.
;
;
; The '*' peer is special and matches an unspecified entity
;

;
; Sample Primary e164 DUNDi peer
;
;[00:50:8B:F3:75:BB]
;model = symmetric
;host = 64.215.96.114
;inkey = digium
;outkey = misery
;include = e164
;permit = e164
;qualify = yes

;
; Sample Secondary e164 DUNDi peer
;
;[00:A0:C9:96:92:84]
;model = symmetric
;host = misery.digium.com
;inkey = misery
;outkey = ourkey
;include = e164
;permit = e164
;qualify = yes
;order = secondary

;
; Sample "push mode" downstream host
;
;[00:0C:76:96:75:28]
;model = inbound
;host = dynamic
;precache = inbound
;inkey = littleguy
;outkey = ourkey
;include = e164	; In this case used only for precaching
;permit = e164      
;qualify = yes

;
; Sample "push mode" upstream host
;
;[00:07:E9:3B:76:60]
;model = outbound
;precache = outbound
;host = 216.207.245.34
;register = yes
;inkey = dhcp34
;permit = all ; In this case used only for precaching
;include = all 
;qualify = yes
;outkey=foo

;[*]
;

#include "auf/dundi.local"